How to install a Kitchen Faucet with Pull-Down Sprayer: Video Guide

3 min read

This how-to install a Kitchen Faucet with Pull-Down Sprayer video explains step by step the process for installing your Faucet. A Kitchen Faucet with Pull-Down or Pull-Out Spray installs basically the same as any other Kitchen Faucet. The main difference is there must be a weight attached to the Pull Out Sprayer hose so when you put the sprayer back it stays in place.

When installing a Kitchen Faucet with Pull-Out Spray, make sure to read the instructions before starting to make sure your particular faucet is similar to the faucet shown in the video.

This video will help illustrate just how easy it is to install your own faucet. With a run time of just under 4 minutes, watch it and you will be ready to install your faucet!

Text of this video

Today we're going to be installing a Pull Down Kitchen Faucet from our Concord Collection. Now the first thing that we're going to need is our deck plate with our threaded rods in it. Now, before we install this we're going to use a bead of silicon to go around the perimeter of the faucet holes. Now, this faucet also comes with a single hole application as well. And we're just going to place that in the sink and use our two plastic lock nuts to secure it.

Now that we've secured our deck plate to our sink we're going to install the main body of the faucet. Now I've already tefloned our flexible lines. Now, we're just going to slide the spray hose down first. Just position that and then we're going to use our locknut and washer to secure it from underneath.

Now we're going to continue to secure our faucet with our locknut and our bracket. And as you can see, I've positioned our bracket so that the hoses go on the inside. Like that. I'm just going to tighten that and now we're going to use a crescent wrench to secure it the rest of the way.

Next we're going to attach our spray hose. Now, you'll want to make sure that this is tefloned as well, same as our flexible hoses. Secure that with our crescent wrench.

Next we're going to install our weight. Now you'll want to make sure you install the weight on the hose side that you're going to pull out at approximately two inches up from the bottom of the hose. I'm going to press those on and use our Phillips screwdriver to tighten both screws.

Now next we're going to attach our water supply lines. I'm just going to hand-tighten these on. Use our crescent wrench to make sure they're completely secure.

Now that we've secured our faucet we're going to remove our spray head and turn the water on and let it run for about a minute to remove any debris that may be in our lines. And then you'll just put back in the washer and we will thread back in our spray head.

And now you're ready to enjoy your Kingston Brass faucet!

Please Like us on Facebook!

If you found this guide helpful please "like" us on Facebook. We are pretty new to the whole social media thing and would appreciate your support!

Disclaimer and Disclosure: FaucetList.com does not accept money, gifts, samples or other incentives in exchange for special consideration when preparing our buying guides. However, we do receive a referral fee from online retailers (such as Amazon) when readers click over to their websites from ours. As an Amazon Associate FaucetList.com earns from qualifying purchases. This helps cover the cost of operation of our free blog. Thanks for your support.

Author Bio: Nick Kuzmin

Author: Nick Kuzmin

Co-founder, FaucetList.com, Plumbing Industry Experience: 25+ years

Nick Kuzmin has been working with or around plumbing products for over 25 years. This lifetime of experience has given him a large amount of useful and practical knowledge on almost all plumbing related topics which he freely writes about and shares online. Nick co-founded FaucetList.com with his father Jim in 2011.

Read Full Bio


Leave a comment

Comments will be approved before showing up.


Also in Buying Guides

Best Rain Shower Head Systems with Ceiling Mounted Showerhead Guide

39 min read

Best Rain Shower Head Systems with Ceiling Mounted Showerhead Guide

A rain shower head system in your primary bathroom brings a luxury spa feeling into your home and the best ceiling mounted rain shower head systems allow you to enjoy this spa relaxation magic on a daily basis! Read this guide to learn everything you ever wanted to know about rain shower systems with ceiling mounted showerheads. Using our 40 years experience, we will teach you everything you need to know on how to build your own rain shower system and show you some gorgeous sample installations along the way!

Read More
Top 10 Kitchen Remodel and Renovation Ideas for 2022

17 min read

Top 10 Kitchen Remodel and Renovation Ideas for 2022

Kitchen remodeling and renovations can be daunting, time consuming, and demanding. Even with all the challenges that may come with renovating, updating your kitchen is never a bad idea. Choosing new finishes, fixtures, appliances, and materials really helps you connect with the space and make your kitchen yours. Check out our article on the top 10 kitchen remodeling and renovation ideas for 2022. You'll see tons of great images and learn about all the hottest design trends. Read the article now!

Read More
Top 10 Small Bathroom Design Ideas

25 min read

Top 10 Small Bathroom Design Ideas Small bathrooms can sometimes be difficult to design. Fortunately, you can check out our Top 10 Small Bathroom Design Ideas for inspiration! Traditional bathroom designs typically feature larger cabinets, separate tub and shower stalls, double vanities, and other fixtures that just won't work in a small space. As home trends change and people become more adventurous with unconventional spaces, we are seeing more and more small bathrooms featuring highly functional fixtures and stunning designs! In this article you will see lots of beautiful small bathroom pictures and learn about clever fixtures designed to work perfectly in small spaces!
Read More